Performance and quality of Oblivion Cables

Oblivion cables uses an advanced cable technology and represent the culmination of over 30 years of research and development.

These cables introduce a level of coherence, detail, dynamic range, control and imaging superior to other cables. To put it simply, the Oblivion cables are one of the best connections available.

  Oblivion Technology Coherence Series

The design theories for the Coherence series audio cables was finished as early as 1986, but several production properties was at that time impossible to achieve and the last obstacle was not solved until 2007.

The Coherence series has been named after the important concept "coherence" in the quantum oscillations in devices such as audio cables. A phenomenon that affects the performance of audio cables is known as jitter. Said jitter occurs due to a lack of coherence at the subatomic level. Thus jitter is quantum noise that limits the performance of audio cables.

Coherence Analog Interconnect Cable RCA

The Oblivion Analog Interconnect cables use WBT nextgen gold-plated copper RCA connector. These connectors offer a low mass design which reduces eddy currents and produces the perfect interface and impedance matching between the cable and the attached component.

Coherence Analog Interconnect Cable XLR

The Oblivion Analog XLR Interconnect cables for balanced operation use a gold plated Neutric XLR connector. These connectors offer a low mass design which reduces eddy currents and produces the perfect interface and impedance matching between the cable and the attached component.

Coherence Digital Interconnect Cable RCA

The Oblivion Digital RCA Interconnect cable use the 1GHz bandwidth version of the WBT nextgen technology connector with orange plug body. These connectors offer a low mass design which reduces eddy currents and produces the perfect interface and impedance matching between the cable and the attached component.

Coherence Digital Interconnect Cable XLR

The Oblivion Digital XLR Interconnect cable for balanced operation use a gold plated Neutric XLR connector. These connectors offer a low mass design which reduces eddy currents and produces the perfect interface and impedance matching between the cable and the attached component.

Coherence Loudspeaker Cable

The Oblivion Loudspeaker cable use WBT cable end sleeves suitable for direct connection or for connection with WBT nextgen Technology Sandwich spades.

Coherence Power Cord

The Oblivion Power cord use IEC and AC mains plugs.

Specifications Entire Oblivion Coherence Line

Insulation: High purity extruded Fluorocarbon Polymer (PTFE)
Conductors: Silver Plated Oxygen Free Copper (SPOFHC)
Capacitance: 50.0pF/meter
Inductance: 0.8uH
Temperature: -65 to +200 degrees Celsius
Voltage rating: 2000 Volt RMS between conductors, 5000 Volt conductors to ambient
DC resistance: 8mOhm/meter
DC current: 70 Ampere continuously
Isolation resistance: >1500 M Ohm pr. kilometer
Dielectric constant: 2.1
Dissipation factor: 0.0002
Passes severe flame tests: IEEE 383 and UL 94 V-0 rating

Oblivion Technology cables are not directional when manufactured. However once they have been used for 40 hours or more in one direction they may sound better hooked up and used in the original direction of break in.